Zeolite Packaged Drinking Water Plant & Accessories
Zeolite Package Drinking Water Plant consists of …
Pretreatment:
This treatment includes Pressure Filter, Iron Removal Filter, Activated Carbon Filter and sometimes Water Softener. Zeolite (India) Pvt. Ltd. is specialized in Iron Removal systems since 1974 Devices and systems manufactured and supplied by the Company can treat iron upto 10 ppm and above in raw water. MOC of devices may vary from SS, MSRL, MSEP, MSFRPL, FRP and so on.
Part of pretreatment also consists of micron filtration for removal of suspended solids, particles and turbidity. MOC of housing is SS, PB, ABS etc.
R.O. System:
R.O. block consists of high pressure pump, control panel, R.O. membrane, high pressure vessel, automation etc. MOC of high pressure pump is SS and most reputed brands. Control panel is to control the entire R.O. block automatically. R.O. membrane is to remove TDs from raw water. High pressure vessels used are made up of FRP or SS. Pressure switches are also used in Zeolite R.O. System to safeguard high pressure pump from dry run and R.O. vessels.
Chemical Dosing System:
Automatic Chemical Dosing Pumps used are of best in quality for dosing of NaOCl solution, antiscalant, pH maintenance chemicals etc. These pumps can be regulated automatically and dosing can be set at a specific concentration.
UV and Ozonator:
Zeolite UV Sterilizer comes with Ss316 L housing and to save the device it comes with individual panel. Ozonator comes with venturies and recirculation pump of best make in the industry. These devices make final product free from bacteria and incorporate a bacteriostatic effect in water.
Capacity:
Available 250 litres per hour to 50,000 litres per hour.
How RO works
When water is passed through a semi permeable membrane under pressure, all particles larger than 0.0001 micron are captured in layers of the membrane allowing only the water molecules pass through the membrane.
The Reverse Osmosis technology is used in areas like healthcare and scientific research where purity is not just important but critical. It has now been adapted for use in homes and offices to provide the same level of purity at minimal cost.
Advantages of ZEO-RO
- The most economical and efficient method for complete removal of dsssolved solids
- Easy to operate and maintain
- Occupies very little space and easy to install
- Can take care of fluctuation of total dissolved solids in feed water
- Easy availability of spares and service
- Prompt deliver
PET BLOW MOULDING MACHINE
Enhancement Features
Mould Clamping
- Hydraulic mould clamping system to enhance power efficiency. It saves air consumption and hence reduces production cost.
- Unique mechanical lock system for positive locking
Heating
- Close loop heating system and auto chamber temperature control (to compensate variation in perform heating due to ambient temperature).
- Optional auto perform temperature control.
- Positioning of heaters is better, ensuring faster and simpler heating. Individual heater position is adjustable in both axes to achieve optimum heating.
- Air ventilation with controllable venting in heating chamber (tor better heat penetration control).
- Start-stop index type oven to minimize variation in temperature of both preforms coming out of chamber at a time.
Product Range
Versatile range to produce 40 ml to 5000 ml bottle / jar. Neck diameter ranging from 20 mm to 120 mm. Due to hydraulic operations, mould can be stopped where required. In case of small diameter bottles, this increases production rate and reduces production cost.
Safety
- Two hand operations (till mould close function is complete) to prevent accidents.
- ELCB in main supply for protection against electric shock.
- Individual MCBs for all heaters
Machine Specifications
Machine Type Semi Automatic
Blowing Pressure 30 kg/cm
Locking Force 25 Ton
Mould Thickness 175 mm 250 mm
Opening Stroke 250 mm
Distance between Tie Rods 445 mm
Total Weight (approx) 1500 kg
Production 600-800 BPH (1 tr. Water Bottle 2 Cavity)
Container Specifications
Max Product Height 350 mm
Neck Size 20-40 mm Double Cavity
Up to 120 mm Single Cavity
Max Product Dia 130 mm Double Cavity
200 mm Single Cavity
Max Product Volume 2 Litres Double Cavity
5 Litres Single Cavity
Utility Requirements For 1.0 Litre Water Bottle 800 BPH
Compressed Air Control 7 CFM8 bar
Blowing 22 CFM 30 kg/cm’
50 LPM 2 to 4 bar, 25
Water Total connected load 12 kw (without utilities)
Power 415 V( 5% Three Phase 4 Wire, 50-60H + Earth)
FULLY AUTOMATIC RINSING FILLING AND CAPPING MACHINE
Enhancement Features
- Mono Block Rotary Machine (from 40 BPM onwards)
- Neck Holding
- No Bottle No Rinsing No Filling and No Capping
- Non Contact Sensors for Bottle Counter
- Separate Cap Hopper Having Capacity 1000 Caps
- Material of Contractions Contact Parts SS316L Rest SS304
Technical Specifications
20-30 BPM 40 BPM 60 BPM 0BPM
Confguraso Rinse-Filet Capper 6.6.3 9.8.4 12.114 15.15.6
Bottle Size Range 200 to 2000ml 200 to 2000mi 200 to 2000 mi 200 to 2000mi
In feed Air Conveyor (Meter/keety Max S Feet Max 5 Feet Max 10 Feet Max 10 Feet
4Out feed Air Comveyor (Meter/Feed) Max 15 Feet Max 15 Feet Max 20 Feet Max 20 Feet
Small Character
Small Character BATCH CODING MACHINE
Our Technology
9000 Series Printers offer the best balance between performance and flexibility in their segment for an easy integration in all manufacturing environments. Their state-of-the-art design requires minimal attention and provides high quality coding.
The continuous inkjet technology prints the best before dates, logos, alphanumeric text and 1D and 2D barcodes for food, beverage, pharmaceutical, cosmetic and electronic industries.
Your Benefits
Performance
- Up to 8 ine printing.
- High speed multi-line printing up to 5.5 m/s.
- Optional Ethernet connectivity.
Quality
Automatic ink-pressure adjustment (let Speed Control) guaranteeing print quality.
Uptime
Unique head cleaning system to ensure trouble-free startup. Easy change of the consumables without stopping marking operations.
Versatility
Wide choice of options making integration onto most production lines efficient: mono or twin-jet, 2 printing resolutions (71 and 115 dpi) and IP65 cabinet.
Options
- IP65 (requires plant air)
- Ethernet connectivity
- Printhead pressurization kit
- 90° bent or side-mounted umbilical cable
Other Characteristics
- 3-meter flexible umbilical cable
- Stainless steel cabinet
- Electrical power supply : 100-120 V or 200-240 V with automatic switching; frequency 50/60 Hz; power 60VA
